keskiviikko 12. lokakuuta 2016

Isafjördurin tilat

This one is going to be in Finnish, sorry y'all English speakers. I'm just going through the handicrafts premises of the school here.

Elikkäs. Ajattelin tehdä pienen postauksen tämän Isafjördurissa sijaitsevan koulun ja Fab Labin tiloista, siltä varalta että tänne joku harkitsee tulevansa vastaisuudessa.
Pääasiallisena syynä tänne lähtemiseen käytännössä on Fab Lab, jossa voi opetella digitaalista suunnittelua ja asiaankuuluvaa teknologiaa. Tekniikan puolelta labrasta löytyy laser- ja vinyylileikkurit, kaksi eri 3D-tulostinta, pienikokoinen leikkuri/kaiverrin ja megaiso CNC-kone.
Vinyylileikkuri. Tällä voi leikata mm. vinyylitarroja ja tekstiiliin painettavia materiaaleja.
Vasemmalla laserleikkuri, oikealla reunassa kaiverrin, jolla voi esmes kaivertaa piirilevyjä.



Pienempi ja isompi 3D-tulostin. Ensi viikolla pitäisi aloittaa näihin tutustuminen!

CNC-leikkuri.

Yksi labran omista väkerrysalueista.


 Koulusta löytyy lisäksi tilat puutöille ja metallitöille. Tekstiilipuolta koulussa ei ole, mutta kaupungin keskustasta löytyy mm. räätäli, joka kuulemma on kovasti yhteistyöhaluinen ja mukana projekteissa tarvittaessa. Metallitöitä silmälläpitäen kohtalaisen lähellä (noin 45 min autolla) on Þingeyrin kylä (Thingeyri), jossa sijaitsee vanha sepän paja. Kylään on myös suunnitteilla Fab Labin etäpesäke.

Itse olen menossa labran esimiehen Thorarinnin kanssa vierailulle Þingeyriin ensi viikolla ja siitä parin viikon päästä pitäisi viettää siellä muutama päivä oman projektityön parissa. Raportoin lisää asiasta tänne, kunhan projekti lähtee kunnolla käyntiin, mutta ideana olisi tehdä yhteistyötä seppien kanssa ja valmistaa tänne paikalliselle koululle oma sulatusuuni ja tehdä sitten alumiinivaluja workshopissa kiinnostuneiden koululaisten kanssa.

Kuvia koulun tiloista katkon jälkeen ->

tiistai 11. lokakuuta 2016

First week in Reykjavik.

We are the two Dottirs of the Dottirs and Son, Sanna and Johanna. We are spending the next ten weeks in Reykjavik as interns at the Fablab. In this blog we´re going to keep you posted what´s happening in Reykjavik and how we experience the Icelandic way of living.

Our first days in the city we were walking around and sightseeing


The Sun Voyager


Harpa 


Real Icelandic fisherman


Saturday daytrip to the Mount Esja



We hiked almost all the way to top!


Skyr :)

Sunday night we visited the Viðey Island for illumination of the Peace Tower


Imagine Peace Tower

http://imaginepeacetower.com/




Rainbow spotting!


maanantai 10. lokakuuta 2016

Of Inlays and Offsetting

Getting in a little bit deeper with Inkscape and laser cutter this week! Over the weekend I got to considering potential future projects I might be doing, and while thinking about those I also wondered how you could efficiently combine two (or more) different (coloured) materials.

And here we get to inlaying and offsetting. Due to the slight amount of material getting cut/burned when using the laser cutter, you can't do a split object and call it day. They will fit into each other, but the fit won't be precise. By offsetting, you can create shapes that fit into each other perfectly.

I first started out with basic square shapes and cardboard. First test I clearly didn't get it. I did just what I first described. Two poorly fitting shapes. The next try was already better and I managed to actually get a decent fit.

With the line thickness of 0,01 the offset with 0,2 mm was good. Woohoo!
Next I proceeded to test it out with plexiglass. The material behaves a bit differently, and at first I did a test with three different offsets. One at 0,1 mm, second at 0,2 mm and third at 0,4 mm. The third one was actually the precise fit so I jotted that down on my notebook for future use.



Finally I started to try this with more irregular shapes, aka letters. First try was actually sort of a success as far as fit went, but it's also important to remember there is a difference between millimeters and centimeters.


It's pretty obvious today is Monday. Many failed attempts, and several where I didn't even successfully get to the actual cutting phase because I just couldn't get Inkscape to do what I wanted. But in the end I prevailed!


Witness the perfectly fitting blue/red example on the middle! (and the completely green one to the left, but that's a bit drab.)
If I had failed a few more times I could've built an optometrist test board.

- Antti

Finnish after the break!

perjantai 7. lokakuuta 2016

Week #1 in Ísafjördur / Ensimmäinen viikko Ísafjördurissa

I am one of the three people posting on this blog. My name is Antti, nice to meet you! Also, I'm the son of the Dottirs and Son.

I will write my posts both in English and Finnish, jos etsit suomenkielistä tekstiä, rullaa alaspäin :) Photos will be multilingual!

We arrived to Reykjavik on Tuesday, and I continued my way forward (or upwards I guess) to Ísafjördur (to any Icelandic people reading this, I am sorry! I have no idea how to do the letter ð without copypasting, so I'm just violating the name of your lovely town constantly throughout this blog. And that goes for anything in Icelandic with special characters. You have been warned.) later the same day.

The view arriving via plane was pretty breath-taking with two huge mountains on either side of the fjord, the town itself on a peninsula within the fjord. The smudgy mobile phone picture definitely doesn't do it justice, but here you go anyway:


And I think this is the textbook definition of "A room with a view"


The first couple of days went by while learning basics about the school, and Fab Lab Ísafjördur, and Fab Lab as the larger organisation. Fab Lab is very much about community, integration and sharing ideas, And I have already seen this in action during the week with local teachers, students and other community members visiting the Lab.

Just as one example, on my first proper day at the lab, a person from http://snowsense.is came to engrave circuit boards they use in sensors that help predict potential avalanches in the regions. In Fab Lab they are also able to manufacture other parts for their sensors as needed. Which is pretty damn amazing/impressive/important! Below an image of the engraving process.



On my behalf, I have started to learn the basics of the Inkscape and laser cutting. I first started with cardboard tests, making and cutting out the logo of my web page ( www.toispualdesign.com ! ) , then a more complex shape, and finally today I used a design for an older pendant I had made, and cut that out of plexiglass.






The plexiglass is rather fragile for this small (about 6 x 5 cm) item with lots of thin appendixes, but I still feel I made decent enough progress within a few days.

In addition I did a stroll around downtown. Have a few pictures!









And that's about it!

-Antti

For Finnish, go forth!
Suomea seuraa katkon jälkeen:

Greetings Earthlings!

This blog will be a collaboration of three people, detailing our experiences during our internships at Fab Labs Reykjavik and Ísafjördur, in Iceland. This is just the initial super informative post detailing what you might expect. The actual meat and potatoes (possibly 3D printed) will follow later!

Tässä blogissa kolmen eri vaihtarin kokemuksia harjoittelujaksoista Fab Lab Reykjavikissa ja Fab Lab Ísafjördurissa, Islannissa. Tässä vasta superinformatiivinen blogin peruskuvaus. Varsinainen (3D-tulostettu) pihvi seuraa perästä!